|Place of Origin:||China|
|Certification:||CERTIFICATE FOR CHINA COMPULSORY PRODUCT CERTIFICATION|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||1 pieces/2.88 square meters/80kg/carton|
|Delivery Time:||2-3 work days|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||50000 Square meters|
|Payment Team:||T/T,lL/C Etc||Usage:||Living Room, Dining Room, Etc. For Floor, Office, Coffee Shop, Hotel, Clubhouse, Etc,for Wall|
|Surface:||Matt Rough Surface||Materal:||Porcelain Tile|
48'X96' Porcelain Wall Tiles,
12.5mm Porcelain Wall Tiles
Large Slab 48'X96'Wood Look Porcelain Texture Wall Tiles Large Ceram Home Interior Ceramic Rustic Wood Tile Flooring
|Model||Porcelain tile CBD42C-H52JB553|
|Name:||Chora Porcelain Tile|
|Discription||color body matte rough surface, low water absorption,use for table top , kitchen table top , indoor and outdoor wall|
|Shade Variation||V4-substantial variation (Color Variation within each tile )|
|Abrasion resistance||6 - commercial considerable traffic|
|Function||Chemical resistant and Frost resistant, Acid-resistant, Antibacterial, Heat insulation, Wear-resistant|
|Usage||Living room, dining room, etc. for floor, office, coffee shop, hotel, clubhouse, etc,for wall|
|Packaging||Standard cartons and wooden pallet|
Supply Ability:50000 Square Meter/Square Meters per Day
5. Raw material and advantages:
CHORA porcelain tile, green building material
CHORA porcelain tile is hard and condense, superficial hardness is very high (hardness 4-5), is scratch-resistant, wear, shock, rupture and compression and have excellent heat-, corrosion- and stain-resistance, not being distorted, split and being-resistant to discoloration, fading, durable and maintenance-free, furthermore, it does not contain any pollution and radiation, thus is an environment-friendly building material, porcelain tile is bright with accurate color dimensions, high-quality finish, fine durability and compression-resistance fine air permeability renewable, environment-friendly
3-test report and certification: Foshan Boli Ceramics Company Limited is one of the largest building material enterprises in South China, we mainly produce porcelain tile, cement tile, polished tile
Our products sell well in domestic market and abroad such as Europe, Middle East, Egypt, South Africa, Middle Africa, Italy, South and East Asia, we have a team of hardworking and innovating technical working staff, we have more than 10-professional production lines and first-class equipment to satisfy the professional technology requirements
6.About laying and pasting construction:
1, when opening the box, should recognize the product specifications, dimensions, color number, etc., the same color number of the product affixed to the same position, do not mix the products of different color numbers together pasted(unless consciously required to obtain Special decorative effects in the figure)
2, before pasting first on the ground test, after using the same color number and size, you can use the adjacent color number and size, and different color number, size tile classification, and then in the bottom of the brick for use Number to indicate. If the brick surface has a pattern or directional pattern, the product should be unified according to the direction of the pattern, in order to best decorative effects.
3, at present, the tile pasting mostly uses wet pasting and dry pasting two methods.
4, when paving the floor brick, it is recommended that the surface area of cement mortar paving should not be too large, so as not to find the surface cement mortar more than the initial coagulation time(about 45 minutes), resulting in the tile and adhesive layer adhesion is not dense Real, causing quality problems such as air drums.
5, when leaving seam pasting, polished brick spacing 2mm-5mm is appropriate. The polished brick and the wall junction leave a seam of 3mm-5mm.
6, pasting should be carried out after the base is compacted. When tiling tiles, the tiles and the pasting surface are first presented at a certain angle(about 15 degrees), and then pushed gently to the horizontal direction by hand to balance the bottom of the brick and the pasting surface.This facilitates the elimination of bubbles; Then tap the brick surface with a hammer handle, so that the bottom of the brick can eat pulp, so as not to produce an empty drum phenomenon; Then knock the brick surface to level with a wooden hammer and measure it with a horizontal ruler to ensure The tile pasting level.
7, the product pasted for about 1 hour(depending on the climate and the degree of cement condensation), we must use the wood bran or sponge to clean the cement mud in time, to avoid the surface contamination time is too long, it is difficult to clean up.
8, about 12 hours after the product is pasted, hit the ground with a wooden hammer in time to check whether there is an empty drum phenomenon. All brickwork should be done in time to remove the surface dirt, 24 hours before walking.
9, pasted tiles within 48 hours, it is best not to use large-scale waxing and other electric equipment, so as not to tile and adhesive layer later shock and lead to unnecessary empty drum phenomenon.
Contact Person: sales