|Place of Origin:||China|
|Certification:||CERTIFICATE FOR CHINA COMPULSORY PRODUCT CERTIFICATION|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||16 pieces/46.08 square meters/80kg/carton|
|Delivery Time:||2-3 work days|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||60000 Square meters|
|Fuction:||Chemical Resistant And Frost Resistant, Acid-resistant, Antibacterial, Heat Insulation, Wear-resistant||Usage:||Living Room, Dining Room, Etc. For Floor, Office, Coffee Shop, Hotel, Clubhouse, Etc,for Wall|
|Surface:||Polished||Absorption Rate:||Less Than 0.5%|
600x1200 porcelain tile bathroom,
10mm slate look porcelain tile
1200x2400mm Living Room Glossy Large Size Full Polished Glazed Gray Floor Tile On Sales
|Packaging||Standard cartons and wooden pallet|
Fine durability and compression-resistance
Fine air permeability
Chemical resistant and Frost resistant, Acid-resistant, Antibacterial, Heat insulation, Wear-resistant
5.Porcelain tile Delivery:
1. After payment, if the goods in stocks then after received confirm payment 7days , if need arrange produce , then need to received confirm deposit 25days . The actual arrival time is based on the logistics company.
Used in indoor and outdoor floor and wall
Standard cartons and wooden pallet
7.Packaging & Delivery:
(1). Selling Units:Single item
(2). Single package size:120X240 cm
(3). Single gross weight:80kg
(4). Package Type:1. Standard export cartons and wooden pallets
(5). Fumigated pallet+carton
(7). Lead Time :5-7 days after receipt of deposit if stock available
9.About laying and pasting construction:
1, when opening the box, should recognize the product specifications, dimensions, color number, etc., the same color number of the product affixed to the same position, do not mix the products of different color numbers together pasted(unless consciously required to obtain Special decorative effects in the figure)
2, before pasting first on the ground test, after using the same color number and size, you can use the adjacent color number and size, and different color number, size tile classification, and then in the bottom of the brick for use Number to indicate. If the brick surface has a pattern or directional pattern, the product should be unified according to the direction of the pattern, in order to best decorative effects.
3, at present, the tile pasting mostly uses wet pasting and dry pasting two methods.
4, when paving the floor brick, it is recommended that the surface area of cement mortar paving should not be too large, so as not to find the surface cement mortar more than the initial coagulation time(about 45 minutes), resulting in the tile and adhesive layer adhesion is not dense Real, causing quality problems such as air drums.
5, when leaving seam pasting, polished brick spacing 2mm-5mm is appropriate. The polished brick and the wall junction leave a seam of 3mm-5mm.
6, pasting should be carried out after the base is compacted. When tiling tiles, the tiles and the pasting surface are first presented at a certain angle(about 15 degrees), and then pushed gently to the horizontal direction by hand to balance the bottom of the brick and the pasting surface.This facilitates the elimination of bubbles; Then tap the brick surface with a hammer handle, so that the bottom of the brick can eat pulp, so as not to produce an empty drum phenomenon; Then knock the brick surface to level with a wooden hammer and measure it with a horizontal ruler to ensure The tile pasting level.
7, the product pasted for about 1 hour(depending on the climate and the degree of cement condensation), we must use the wood bran or sponge to clean the cement mud in time, to avoid the surface contamination time is too long, it is difficult to clean up.
8, about 12 hours after the product is pasted, hit the ground with a wooden hammer in time to check whether there is an empty drum phenomenon. All brickwork should be done in time to remove the surface dirt, 24 hours before walking.
9, pasted tiles within 48 hours, it is best not to use large-scale waxing and other electric equipment, so as not to tile and adhesive layer later shock and lead to unnecessary empty drum phenomenon.
Contact Person: sales